Made to fit.
Built to stay on.

Quick release plate holders and airflow parts for UK cars. Moulded in England from carbon-fibre-reinforced polyethylene.

Plate holders

A keyhole lock,
not a magnet.

A keyhole lock, not a magnet.

Drop the plate on, push down, it locks. Lift it off in a second when you want the shot.

from£25Shop the kit →
Aero

Cold air, straight
to the filter.

BMW F series cold air intake airscoop

The F-Series airscoop sits behind your kidney grille and feeds fresh air into the filter box. Direct fit, no cutting.

£25Shop aero →
Made in EnglandMoulded to order in Lancashire
Free UK deliveryOn orders over £30
2 year guaranteePlate kit: if it breaks, we replace it
Tested to 4,000 milesPlate kit, locked on and driven
Plate holders

The last plate holder you'll ever buy.

A mechanical lock, not a magnet. Screw the button on once, drop your plate over it, push down, and it locks into place.

The Simple Locking System

  • The Button

    Screws onto the existing plate mounting point on your bumper. Low enough in profile that the plate still sits flush.

  • The Quick Release Plate

    Stick the quick release plate on the back of your number plate. The keyhole slot has a wide opening to drop over the button and a narrow channel to capture it.

  • The Lock

    Drop the plate on, push down, and the button seats into the narrow end of the keyhole. Tested over 4,000 miles with no release.
Shop Now

No Magnets?

Magnet holders hold your plate on by force. At speed, air gets between the plate and the bumper and can peel it off. Ours is a keyhole lock: the plate is mechanically captured on the button, so road vibration pushes it deeper into the lock, not off the car. The only way off is lifting it up.

KLIQ vs magnetic plates

Magnets hold your plate on by force. We lock it on. That's the whole difference.

  Magnetic plates

Mechanical keyhole lock

Plate physically locks on

2 year replacement guarantee

Carbon-fibre-reinforced polyethylene

Made in England
Quick release number plate holder kit V2

What's Included?

Everything you need for one bumper:

  • 2x Quick Release Plate
  • 2x Bumper Buttons
  • 2x Screws
  • Double Sided Tape
  • Kliq Co Sticker

What drivers say

  • Love the design!

    Love the design and it works great! Clicks into place and feels strong and sturdy - been waiting for a design like this to hit the market

    — Tom

  • Gets a lot of attention!

    I love showing people are car meets 😂 the reactions are the best when it clicks into place. People have had a tug on it and shocked how strong they stay on!

    — Josh

  • Bought a second kit

    Ordered one kit to test, ordered another for my other car. Super happy with the design, I've had magnet plates before and they just fall off

    — Spencer

1 3
Aero

Give your engine the air it wants.

BMW F series cold air intake airscoop
BMW F-Series Cold Air Intake / Airscoop

Cold air in. Not hot under-bonnet air.

This airscoop sits behind the BMW kidney grille and redirects incoming air straight into the filter box, so your engine pulls in a bigger volume of cool, fresh air.

  • Channels airflow from behind the kidney grille into the filter box
  • More cold air reaching the filter
  • Direct fit, no cutting or permanent modification
  • Petrol, diesel and M variants all covered
Shop the airscoop →£25
Fits

1 Series, 2 Series, 3 Series, 4 Series, M135i, M235i, M240i, M2, M3, M4

F20F21F22F30F31F32F33F34F35F36F80F82F87
Before you orderCheck which side your factory intake duct sits on. Look for the mesh section behind the kidney grille. That's the side your airscoop goes.
Spares

4× bumper buttons

Buttons only, screws not included. £5.

Add spares

Questions, answered

Is it legal?

Yes. Nothing in the number plate regulations bans quick-release mounts — your plate just needs to be displayed, secure and legible, which a fitted Kliq is. Keep the plate on whenever you're on a public road.

Will it hold on the motorway?

Yes. The plate is mechanically captured on the button, not held by friction or magnetism, so airflow and vibration can't peel it off. Tested to over 4,000 miles.

Is it car wash safe?

Yes, once the adhesive has cured for 24 hours. Brushes push the plate against the bumper rather than lifting it — the direction the lock is strongest in.

Will it damage my bumper?

No. The button uses your existing plate mounting point, and the release bonds to the plate rather than the car. It removes cleanly with heat and adhesive remover.

Will the screws fit my car?

The screws included are standard UK number plate screws, which fit most cars. A few use a different size or fitting, so it's worth checking with your vehicle manufacturer — or the screws already holding your current plate on — that they'll fit.

Does it fit 4D & 3D gel plates?

Both, yes. The release bonds to the flat back of the plate, so whatever's on the front makes no difference. Heavier 4D plates are exactly where a mechanical lock beats a magnet.

Which side does my airscoop go?

The same side as your factory intake duct. Look for the mesh section behind the kidney grille — that's your side.

Will the airscoop fit my BMW?

It fits F20, F21, F22, F30, F31, F32, F33, F34, F35, F36, F80, F82 and F87 — 1, 2, 3 and 4 Series plus M135i, M235i, M240i, M2, M3 and M4. Petrol, diesel and M variants all covered.

Do I need to cut anything to fit the airscoop?

No. It's a direct fit with no cutting or permanent modification.

Need Help?

Track Order

Please enter your tracking number below. If it doesn't work, email us at support@kliqco.com